Completed theses

Topic Year Processor Contact person/supervisor
Analysis and optimization of the crisis management of Stadtwerke Zittau GmbH in the technical area of gas, as a supply network operator of a critical infrastructure to ensure security of supply in the gas supply. 2023

Lukás Veselý

Prof. Dr. techn. Stefan Kornhuber, Prof. Dr. rer. nat. Thomas Schönmuth, Dipl.-Ing. Tina Renger
Variant decision on the electric points heating in Zeitz station (70 points from rail km 42.0 to km 46.2) on the Leipzig-Leutzsch - Probstzella railroad line (line 6383) 2023

Ferenc Teichler

Prof. Dr. techn. Stefan Kornhuber, Dipl.-Ing. Clemens Haffner
Optimization of the availability of heating rods of point heating in railroad operation through preventive fault detection 2023 Christian Bauch Prof. Dr. techn. Stefan Kornhuber, André Foit
Contribution to the challenges of electrifying manufacturing processes in the glass industry to achieve climate-neutral production 2022 Niklas Fabricius Prof. Dr. techn. Stefan Kornhuber, Dipl.-Ing. Robert Borrack
Extension of a dynamic heating model for medium-voltage cables 2022 Sören Kalz Prof. Dr. techn. Stefan Kornhuber, Rico Gerhofer, Ragnar Hüttner
Investigations into the objective detection of test specimen failures during erosion tests 2022 Niklas Trabitz Dipl.-Ing. (FH) Stefan Kühnel
Aspects of serial grid integration of electric vehicles on GDR type buildings in Jena Neulobeda 2022 Marcus Wöckel

Prof. Dr. techn. Stefan Kornhuber, M.Sc. Andreas Roth

Rotationally symmetric electrode arrangement for the representation of a capacitance 2021 Jan Hartung Prof. Dr. tech. Stefan Kornhuber, Dr.-Ing. Böhme
Requirement analysis of an industrial SCADA system for monitoring and controlling the auxiliary power supply of NPPs including solution approaches for optimization at the beginning of the system engineering process 2021 Hauke Höhne Prof. Stefan Kornhuber, Dipl.-Ing. Stephan Schnabel, Dipl.-Ing. Marcus Hein
Analysis and optimization of the energy efficiency of injection moulding automation systems 2021 Robert Mühle Prof. Dr. tech. Stefan Kornhuber, Prof. Dr.-Ing. Bellair, Dipl.-Ing.(FH) Marcus Rädel
Load reduction of the F60 conveyor bridge construction in Nochten through metrological diagnostics and subsequent optimization of the device control system 2021 Florian Riemer Prof. Dr. tech. Stefan Kornhuber, Dipl.-Ing.(FH) Klaus Dieter Kotzam
Economy and efficiency of building energy supply in the context of standardization 2020 Florian Tschentscher Prof. Dr. tech. Stefan Kornhuber
Determination and comparison of possible on-site tests for HVDC cable systems with a voltage of 525 kV 2020 Franz Seifert Prof. Dr. tech. Stefan Kornhuber
Development of a system for wireless control of pole disconnectors 2020 Adrian Gnot Prof. Stefan Kornhuber, Joachim Träumer
Contribution to the optimization of the design of creepage distances and heights for KÜS and KAS for 525 kV HVDC system considering alternative concepts 2020 Rudi Lange Prof. Stefan Kornhuber, Dipl.-Ing. Schreiber
Construction of a test rig for laser-based space charge measurement in polymeric insulating materials 2020 Henry Hirte Prof. Stefan Kornhuber, Frank Schramm B.-Eng.
Cable route location of de-energized low-voltage cables - Development of a measurement concept for determining the route and its depth using a transmitter and receiver principle with direct coupling 2020 Philipp Wagner Prof. Stefan Kornhuber, Frank Schramm B.-Eng.
Determination of the breakdown voltage in air as a function of humidity and temperature at small electrode distances (< 20 cm) 2019 Harald Schmalfuß Prof. Stefan Kornhuber, Dr. Pietsch
Investigations on the influence of conditioning conditions and surface structure of polymeric insulating materials on the hydrophobic resistance 2019 Mr. Gorf Dipl.-Ing. (FH) Rüdiger Cervinka
Investigations into the influence of the type of test voltage on the high-voltage arc resistance of polymeric insulating materials 2018 Mr. Gersten Dipl.-Ing. (FH) Stefan Kühnel
Investigation of the material properties of ultra low-k dielectrics as a function of the liquid flow and transient behavior in the PECVD process 2018 Mr. Pletz Prof. Stefan Kornhuber Dipl.-Phys. Ulrich Mayer
Options for cost reduction on HX chillers in the CVD area 2018 David Eglin Prof. Stefan Kornhuber Dr-Ing. Stefan Harazim
Checking the applicability of FDS analysis to assess the influence of moisture on electrically stressed insulating material interfaces 2018 Jun Ting Loh Dipl.-Ing. (FH) Mario Dressler Prof. Stefan Kornhuber.
Investigation of the lithographic process capability and its influencing factors on the final geometry of the fasteners 2017 Mirko Palzer Prof. Stefan Kornhuber Dipl.-Ing. Thomas Platz (Ext)
Determination of surface/space charges on elastomers in electrical power engineering for use in HVDC 2016 Florian Willem Prof. Stefan Kornhuber
Comparative studies on the breakdown voltage of polymeric solid insulations with inner macroscopic longitudinal interfaces 2015 Thomas Plötzki Dipl.-Ing. (FH) Mario Dreßler
Evaluation of the electrical effectiveness of hydrophobic recovery and hydrophobic transfer using the dynamic drop test method as a diagnostic method 2015 Jonathan Hänsch Dipl.-Ing. (FH) Christiane Bär